Cleaning And Care - Unold 78856 Instrucciones De Uso

CLEANING AND CARE

Unplug the machine before cleaning it.
Do not immerse the machine in water or any other liquid nor clean it under
running water.
1. Wipe the appliance with a damp cloth. Do not use any scouring agents.
2. The knife is made of stainless steel. Just wipe it with a damp cloth. Please
be very careful when cleaning the knife.
Caution: The knife is very sharp.
3. From time to time you should also clean
the space behind the knife. First remove
the carriage by tilting it up and removing
it from the guide. Then turn the screw in
the middle of the knife clockwise (see pic-
ture).
4. Take out the knife very carefully and clean
it by hand in warm water with a drop of a
washing-up liquid.
5. Do not leave the knife in the water in order
to reduce the risk of injuries. Reinstall it directly after cleaning.
6. We recommend to grease the tooth wheel at the backside of the knife from
time to time with some Vaseline.
7. Clean the housing behind the knife with a dry cloth or a soft brush.
8. Install the knife in reverse order. The interior must be dry before inserting
the knife.
9. Turn the screw counterclockwise until it clicks in.
10. Place the carriage on the carriage conduit.
11. For space saving storage (e.g. in a drawer) you can take
off the carriage and then fold up the carriage guide.
20
Copyright UNOLD AG | www.unold.de