Combisystem; Guide To Using This Manual; Symbols In Text - Stihl FCS-KM Manual De Instrucciones

Ocultar thumbs Ver también para FCS-KM:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English / USA

CombiSystem

+
+
In the STIHL CombiSystem a number of
different CombiEngines and CombiTools
can be combined to produce a power
tool. In this instruction manual the
functional unit formed by the
CombiEngine and CombiTool is referred
to as the power tool.
The CombiEngine and CombiTool come
with separate instruction manuals.
Always read and make sure you
understand both instruction manuals
before starting and using your machine.
Keep the manuals in a safe place for
later reference.
2

Guide to Using this Manual

Pictograms
All the pictograms attached to the
machine are shown and explained in
this manual.
The operating and handling instructions
are supported by illustrations.

Symbols in text

The individual steps or procedures
described in the manual may be marked
. .
in different ways:
. .
:
A bullet marks a step or procedure
without direct reference to an
illustration.
A description of a step or procedure that
refers directly to an illustration may
contain item numbers that appear in the
illustration.
Example:
Loosen the screw (1)
Lever (2) ...
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols described below:
Warning where there is a risk of an
accident or personal injury or
serious damage to property.
Caution where there is a risk of
damaging the machine or its
individual components.
Note or hint which is not essential
for using the machine, but may
improve the operator's under-
standing of the situation and result
in better use of the machine.
Note or hint on correct procedure in
order to avoid damage to the
environment.
FCS-KM

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido