Engineering Improvements; Safety Precautions And Working Techniques - Stihl FCS-KM Manual De Instrucciones

Equipment and features
This instruction manual may refer to
several models with different
features. Components that are not
installed on all models and related
applications are marked with an
asterisk (*). Such components may
be available as special accessories
from your STIHL dealer.

Engineering improvements

STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. If the
operating characteristics or the
appearance of your machine differ from
those described in this manual, please
contact your STIHL dealer for
assistance.
Therefore some changes, modifications
and improvements may not be covered
in this manual.
FCS-KM
Safety Precautions and
Working Techniques
Warning!
Because a CombiEngine
equipped with an edger
CombiTool is a high-
speed, fast-cutting power
tool, special safety
precautions must be
observed to reduce the risk of personal
injury.
It is important that you
read, fully understand and
observe the following
safety precautions and
warnings. Read the
owner's manuals and the
safety instructions of your CombiEngine
and CombiTool periodically. Careless or
improper use of any power tool may
cause serious or fatal injury.
Have your STIHL dealer show you how
to operate your power tool. Observe all
applicable local safety regulations,
standards and ordinances.
!
Warning!
Do not lend or rent your power tool
without the owner's manuals. Be sure
that anyone using your power tool
understands the information contained
in these manuals.
English / USA
!
Warning!
The use of any edger may be
hazardous. If the rotating cutting tool
comes in contact with your body, it will
cut you. When it comes in contact with
solid foreign objects such as rocks or
bits of metal, it may fling them directly or
by ricochet in the direction of bystanders
or the operator.
Striking such objects could damage the
cutting attachment and may cause
blades to crack, chip or break.
STIHL does not recommend the use of
an edger when cutting in stony areas.
Thrown objects or damaged blades may
result in serious or fatal injury to the
operator or bystanders.
!
Warning!
Minors should never be allowed to use a
power tool. Bystanders, especially
children, and animals should not be
allowed in the area where a power tool is
in use!
Never let the edger run unattended.
3