Replacing Wheels; Replacing The Skirt - Stihl FCS-KM Manual De Instrucciones

Replacing Wheels

2
Depth wheel
Have a worn wheel replaced by your
dealer*.
The end of the thread on screw (1) is
caulked to ensure that the wingnut (2)
does not work loose and be lost.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by your
dealer.
*
STIHL recommends a STIHL
servicing dealer
FCS-KM
1
Gearbox wheel
Have a worn wheel replaced by your
dealer*.
The wheel helps protect the
gearbox from wear. If the gearbox
wheel is worn, also check the wear
guard (arrow) and the gearbox for
signs of damage – see "Checking
and Replacing the Wear Guard".
*
STIHL recommends a STIHL
servicing dealer
English / USA

Replacing the Skirt

2
1
Removing the skirt
: Loosen the screw (1) on the
clamp (2) and slide the clamp back
along the drive tube in the direction
of the engine.
3
3
: Release screws (3) on arm (4) and
remove together with arm.
4
17