Cooking With Time Control - Unold 58255 Instrucciones De Uso

9. If there is no pot or pan on the
burner, a signal tone sounds at
intervals, the display shows E 0
and the appliance automatically
switches off after 30 seconds.
10. The appliance can be switched
off at any time when cooking by
pressing the START/STOP button.
11. The settings made are not saved
at the end of the program or if the
program is cancelled.
12. The fan continues to run for about
30 seconds after the end of the
program.
13. If the program is not controlled by
the timer, the appliance automati-

COOKING WITH TIME CONTROL

This function makes it possible to program the appliance so that it automatically
switches off after a preselected time.
1. First, select the desired function
as described above (Heat or Tem-
perature).
2. Press the MENU button and keep
it depressed until the „P + TIME"
or „C° + TIME" indicator light is
illuminated and „3:00" is shown
in the display.
3. Then within three seconds press
the „+" or „-" button to enter the
desired number of minutes. The
minutes can be entered in 1-min-
ute increments, the maximum
time that can be set is 3 hours.
4. If you do not make any settings
within four seconds, the time pro-
gramming is concluded and the
appliance returns to the initial
state.
5. When cooking, the heat or temper-
ature level and the remaining time
Copyright UNOLD AG | www.unold.de
cally switches off after two hours
at the latest.
14. After use, unplug the power cord
from the electrical outlet to save
energy.
15. Caution: Do not allow the appli-
ance to run unattended during the
cooking program.
CAUTION:
The glass cooktop can become
hot from the heat radiated from
pots or pans. Therefore, do not
touch the surface immediately
after cooking.
are displayed alternately. Mean-
while you can also still change the
heating or temperature level.
6. When the programmed (i.e. set
time) is reached the appliance
automatically switches off.
7. The appliance can be switched
off at any time when cooking by
pressing the START/STOP button.
8. The set times are not saved at the
end of the program or if the pro-
gram is cancelled.
9. The fan continues to run for about
30 seconds after the end of the
program.
10. If the program is not controlled by
the timer, the appliance automati-
cally switches off after two hours
at the latest.
25