Cooking With Time Control - Unold Double Pro Plus Instrucciones De Uso

8. The following settings are possible and can be adjusted via the „+" and „-"
buttons:
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Level 7
Level 8
Level 9
Level 10
9. If there is no pot or pan on the burner, a signal tone sounds at intervals,
the display shows E 0 and the appliance automatically switches off after
30 seconds.
10. The appliance can be switched off at any time when cooking by pressing the
START/STOP button.
11. The settings made are not saved at the end of the program or if the program
is cancelled.
12. The fan continues to run for about 30 seconds after the end of the program.
13. If the program is not controlled by the timer, the appliance automatically
switches off after two hours at the latest.
14. After use, unplug the power cord from the electrical outlet to save energy.
15. Caution: Do not allow the appliance to run unattended during the cooking
program.
CAUTION:
The glass cooktop can become hot from the heat radiated from pots or pans.
Therefore, do not touch the surface immediately after cooking.

COOKING WITH TIME CONTROL

This function makes it possible to program the appliance so that it automatically
switches off after a preselected time.
1. First, select the desired function as described above (Heat or Temperature).
2. Press the MENU button and keep it depressed until the „P + TIME" or „C°
+ TIME" indicator light is illuminated and „3:00" is shown in the display.
26
60°C
80°C
100°C
120°C
140°C
160°C
180°C
200°C
220°C
240°C
Copyright UNOLD AG | www.unold.de