Maintenance; Maintenance Of The Lifting Column; Maintenance Of The Hand Switch; Cleaning - RK Rose+Krieger RK Powerlift M Instrucciones De Montaje

7. Life phases

7.10 Maintenance

7.10.1 Maintenance of the lifting column

Basically, the lifting column does not require maintenance, but it is not exempt from wear. This
means that in the case of excessive wear, the safety of the product may no longer be guaranteed.
You can recognise excessive wear on faulty functions, increased play of the moving parts or
unusual sounds. The replacement of worn parts generally only takes place in the manufacturing
factory. The lifting column must be sent to us for this purpose. Interventions or attempts to make
repairs by yourself are not permitted.
Work with the lifting column may only take place in accordance with these instructions. The
device may only be opened by authorized specialist personnel. If there is a fault with the column,
we recommend that you contact the manufacturer or send it for repair.
•
When working on the electrics or the electrical elements, they must be first disconnected from
the supply to prevent any risk of injury.
•
Unauthorized conversions of or changes to the lifting column are not permitted for safety
reasons.
•
Safety-related equipment must be checked on a regular basis, however, at least once a year
for completeness and function.
The technical safety inspection of the lifting column must be carried out according to DIN EN
62353. The technical safety inspection must be carried out every twelve months at the latest. The
technical safety inspection may only be carried out by authorized specialist personnel.

7.10.2 Maintenance of the hand switch

Hand switch does not require any maintenance. All work on the hand switch may only be carried
out in accordance with these instructions. The actions described in the assembly instructions are
to be observed. If there is a fault with the unit, we recommend that you contact the manufacturer
or send the unit for repair.

7.11 Cleaning

You can clean the hand switch and the outer surfaces of the lifting column with a clean, lint-free
cloth.
Solvent-based cleaners will corrode the material and can damage it.
60