Waeco MagicSpeed MS800 Instrucciones De Montaje Y De Uso página 51

_MS-800.book Seite 51 Donnerstag, 1. Juni 2006 8:22 08
MagicSpeed MS800
Warning
To prevent the risk of short circuits, always disconnect the negative
terminal of the vehicle's electrical system before working on it.
If the vehicle has an additional battery, its negative terminal should
also be disconnected.
Warning
Inadequate supply cable connections could result in short circuits
which:
– cable fires occur
– the airbag is triggered
– electronic control devices are damaged
– electric functions fail (indicators, brake light, horn, ignition,
lights)
Please observe the following instructions:
When working on the following supply lines, only use insulated cable lugs,
plugs and tab sleeves.
– 30 (direct supply from positive battery terminal)
– 15 (connected positive terminal, behind the battery)
– 31 (return cable from the battery, earth)
– 58 (parking light, reversing light)
Do not use terminal strips.
Use a crimping tool (1 16, page 3) to connect the cables.
When connecting to cable 31 (earth), screw the cable
– to the vehicle's earth bolt with a cable lug and a gear disc or
– to the sheet-metal bodywork with a cable lug and a self-tapping screw.
Ensure that there is a good earth connection.
If you disconnect the negative terminal of the battery, all data stored in the
volatile memories will be lost.
The following data must be set again, depending on the vehicle
equipment options:
– radio code
– vehicle clock
– timer
– on-board computer
– seat position
You can find instructions for making these settings in the appropriate
operating instructions.
Safety and installation instructions
51