Waeco MagicSpeed MS800 Instrucciones De Montaje Y De Uso página 69

_MS-800.book Seite 69 Donnerstag, 1. Juni 2006 8:22 08
MagicSpeed MS800
9.1 Diagnosis mode A
Diagnosis mode A tests the electronic components and electrical
connections.
The LED in the electronic module and the integrated buzzer simultaneously
show that the electric wiring and the components are working properly. When
checking the components later, it is necessary to uncover the electronic
module, because the audible signals accompany the optical ones.
You will receive confirmation from the LEDs and the buzzer when you
activate the following signals:
SET button
RES button
Brake
Clutch switch
Neutral safety switch
Travel speed signal in teach mode
Engine speed signal in teach mode
The audible and visible signal are emitted for a maximum of ten seconds per
input to ensure that other messages are not suppressed.
If you activate one of the functions above and do not hear or see a signal:
➤ Check the electric wiring.
Diagnosis mode
69