Product Features - Bosch Zamo Manual Original

28 | English
Laser line adapter
The laser line adapter is intended to be used in combination
with the Zamo digital laser measure for vertical or horizontal
alignment (e.g. of wall pictures) in interior areas.
Tape adapter
The tape adapter is intended for use in combination with the
Zamo digital laser measure for measuring circumferences (e.g.
of vases, pipes, etc.) and lengths of freestanding objects (e.g.
televisions, shelves, etc.) in interior areas.
Wheel adapter
The wheel adapter is intended for use in combination with the
Zamo digital laser measure for measuring distances between
two points (e.g. lengths of material) in interior areas.

Product features

The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
(1) Measuring button
(2) Display
(3) Battery compartment cover
(4) Locking mechanism of the battery compartment cover
(5) Serial number
(6) Laser warning label
(7) Reception lens
(8) Laser beam output
(9) Cover cap
(10) Release buttons for adapter
Display elements
(a) Battery warning
(b) Temperature warning
1 609 92A 454 | (14.06.2018) Bosch Power Tools