Digital Laser Measure With Laser Line Adapter - Bosch Zamo Manual Original

36 | English
Digital laser measure with laser line
adapter
Operation
Activating the laser line
– Switch on the measuring tool (see "Switching the laser
measure on/off", page 33).
– To show the laser line, briefly press the measuring button
(1). The indicator flashes on the display.
Do not direct the laser beam at persons or animals and
u
do not stare into the laser beam yourself (even from a
distance).
Note: If the measuring tool is switched on when fitting the ad-
apter, the laser will automatically switch off. Pressing the
measuring button (1) will reactivate the laser line.
Aligning the laser line
– Align the laser line with the level for horizontal alignment
(12) (see figure F) or the level for vertical alignment (11)
(rotate the measuring tool by 90°) (see figure G).
The bubble must be in the centre of the level vial.
– To precisely align the laser line, you can turn the adapter
head by ±10° around the laser line.
Note: Make sure that the measuring tool is always positioned
horizontally in order to obtain an exact measurement. You can
adjust the height of the laser line by placing suitable objects
underneath (e.g. a ladder, books, etc.).
1 609 92A 454 | (14.06.2018) Bosch Power Tools