Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6.1
Calling up the service menu
Open Main menu → Settings → Service.
1.
2.
Press and hold the
3.
Open and edit the required menu item.
Note
You can find an overview of all of the menu
items and information on the possible set-
tings for the service menu in the Overview
of the functions for the competent person
(→ Page 37) in the appendix.
4.
If required, enter the five-digit password in order to edit
a menu item in the service menu.
5.
If you do not know the password, ask customer service.
7
Start-up
7.1
Starting up for the first time
▶
Use the installation assistant to carry out the 1st com-
missioning for the inverter.
7.1.1
Running the installation assistants
▶
Connect the product to the power grid.
◁
The installation assistant starts automatically.
When you switch on the product, the installation assistant is
displayed until all of the required menu items have been set
completely.
All of the menu items except for Main menu → Information
→ Country setting can also be changed at a later time.
The Country setting menu item can be reset at a later time
but this will result in data losses.
Note
You can find further information about the change
to the Country setting in the Overview of the
functions for the competent person (→ Page 37)
and in the operating instructions for this product.
The installation assistant displays a checklist of the required
settings for the initial start-up.
If you have not yet set a menu item, the menu item is dis-
played in the checklist with a
If you have not set a menu item completely, the menu item is
displayed in the checklist with a
You can find further information about the setting options for
the menu items for the installation assistant in the Overview
of the functions for the competent person (→ Page 37) or in
the Overview of operating and display functions (→ Page 9).
0020273427_02 VPV I Installation and maintenance instructions
and
buttons for three seconds.
.
.
7.1.1.1 Setting the menu language
1st commissioning
Language
Date format
Date
1.
Open Language.
Note
During the initial start-up, the menu item
Language is displayed.
2.
Use
or
to set the desired language for the menu.
3.
If you have selected the desired menu language, use
to apply the selection.
4.
Press
.
◁
The displayed menu items are now displayed in the
language that you selected.
7.1.1.2 Setting the date format
1.
Open Date format.
2.
Set the required date format.
7.1.1.3 Setting the date
1.
Open Date.
2.
Set the required date.
7.1.1.4 Setting the time format
1.
Open Time format.
2.
Set the required time format.
7.1.1.5 Setting the time
1.
Open Time.
2.
Set the required time.
7.1.1.6 Setting the country
Note
You can only change the Country setting by
restoring the inverter to the factory settings, which
causes settings and data to be lost.
The country that is selected does not affect the
menu language that is set and displayed.
1.
Open Country setting.
2.
Select the country in which the inverter will be operated.
3.
If you cannot select the desired country, you can, as an
alternative, select a country whose specifications are
stricter than those of the desired country.
4.
If you have queries regarding the country setting, con-
tact customer service, if required.
5.
Confirm the selection by pressing
6.
Press
.
Start-up 7
.
31
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
