Event Message; Basic Display - Vaillant VPV I Serie Instrucciones De Funcionamiento

The end user level contains information and setting options
that you require as the end user:
The installer level is reserved for the competent person. It is
protected by a code. Only competent persons may change
any settings in the installer level:
Overview – main menu (→ Page 9)

4.1.1.1 Basic display

Xxxxxxxxxxx
1323
9 8
1 Designation of the
measured value that
is displayed
2 Scroll bar
3 Value of the measured
value that is displayed
with unit
4 Current time
In order to access the basic display, press and hold
at least one second.
The latest measured values for the photovoltaic installation
are displayed in the basic display (→ Operating and display
functions in the appendix).
4.1.1.2 Main menu
Xxxxxxxxxx
Xxxxxxx
Xxxxxxx
Xxxxxxx
1 Selection level
2 Menu item that is selec-
ted
▶
Press the button in the basic display to access the
main menu.
The main menu contains menu items for default settings and
information on the inverter.
0020273427_02 VPV I Operating instructions
1
2
3
W
F
5
7 6 4
5 Fixed voltage mode
switched on
6 Power reduction
7 Data connection
8 Symbol for unacknow-
ledged event message
9 Alternating: Today's
date or the inverter's IP
address
for
1
2
3
4
3 Scroll bar
4 Other menu items that
can be selected

4.1.1.3 Event message

1 2
7 Xxxxxxxxxx
Xxxxxxx
6
5
1 Event type
2 Date and time of the
occurrence
3 Event status
Flashes if
4 Text of the event mes-
sage
There are three types of event:
Symbol Event type
Information
Warning
Fault
You can find out which measure is required for a warn-
ing or fault in the Overview of the event messages and
troubleshooting (→ Page 15) in the appendix.
Event messages with a warning or fault are also signalled by
red flashing display lighting.
As an option, event messages with a warning or fault can
also be signalled by an audible alarm. You can find inform-
ation about configuring the audible alarm in the Overview
of the operating and display functions (→ Page 9) in the ap-
pendix.
The display lighting flashes red until all of the causes of the
warning or fault event messages have been eliminated.
–
2 tones: Warning
–
3 tones: Fault
A new event message is shown in the display until it is ac-
knowledged, the cause has been eliminated or a more re-
cent event message occurs.
If the status is on , the cause of the event message
has not yet been eliminated.
If the cause has been eliminated, the date on which the
cause was eliminated is shown as the status.
You can find a complete overview of the event messages
(→ Page 15)in the appendix.
Operation 4
4
3
5 Up-to-dateness
Flashes if
6 Sum of all event mes-
sages in the event log
7 Number for the event
message in the event
log
Meaning
No measure required.
The installation creates
further power.
Measure required.
Installation creates power;
power restrictions are
possible.
Measure required.
The installation does not
create any power.
5