Sunrise Medical Jay J3 Cushion Instrucciones Para El Uso página 4

e ng liS h e ng liS h
laundry care Symbols
re-ASSeMBling the JAY J3 cuShion After
cleAning
follow cleaning and maintenance instructions as described in
"easy maintenance and cleaning" then re-assemble as follows.
insert the Jay fluid pad on the foam base making sure that all
velcro® strip locations are aligned. A mis-alignment or creation of an
edge could cause an unwanted pressure point which could lead to
insert the foam base into the outer cover. ensure that the zipper
is at the rear of the foam base (the part number tag should be
to the rear of the foam base) where the pelvic loading area is
located.
Supplemental
fluid pads
(field variable
version only)
plA reducer
(if applicable)
JAY3c Manual rev. A
Machine wash in warm water
(60° C)
only non-chlorine bleach,
when needed
drip dry
do not iron
do not dry clean
WArning
injury.
fluid insert
foam base
4
JAY J3 cuS hion