Scope Of Delivery; Accessories; Transport And Storage; Delivery - Wilo Rexa PRO Serie Instrucciones De Instalación Y Funcionamiento

en-US
4.8

Scope of delivery

4.9

Accessories

5

Transport and storage

5.1

Delivery

5.2

Transport

16
Transport and storage
Example: Wilo-Rexa PRO V06DA-110/EAD1F2-T0015-646-F
/10 = rated power P
0015
Frequency mains connection: 5 = 50 Hz, 6 = 60 Hz
6
Key for rated voltage
46
Additional electrical equipment:
F
F = without capacitor, with bare cable end
▪ Pump
▪ Cable with bare end
▪ Installation and operating instructions
▪ Guide system
▪ Pump foot
▪ Special versions with Ceram coatings or special materials
▪ External pencil electrode for sealing chamber control
▪ Level controls
▪ Fixing accessories and chains
▪ Switchgears, relays, and plugs
Following receipt of the shipment the shipment must be immediately checked for defects
(damage, completeness). Any existing defects must be noted on the freight documentation!
Furthermore, the defects must be reported to the transport company or manufacturer on
the date of receipt. Claims reported after this date can no longer be invoked.
WARNING
Standing under suspended loads!
People must not stand under suspended loads! There is a risk of (serious) injury due to
falling parts. The load must not be moved over the work areas in which people are
present!
WARNING
Head and foot injuries due to a lack of protective equipment!
During work there is a risk of (serious) injury. Wear the following protective equipment:
• Safety shoes
• If lifting equipment is used, a protective helmet must also be worn.
NOTICE
Use only technically faultless lifting equipment!
Use only technically faultless lifting equipment to lift and lower the pump. Make sure
that the pump does not jam during lifting and lowering. Do not exceed the maximum
bearing capacity of the lifting equipment! Check that lifting equipment is functioning
properly before use!
in kW
2
WILO SE 2019-02