Type Key - Wilo Rexa PRO Serie Instrucciones De Instalación Y Funcionamiento

4.7

Type key

Installation and operating instructions Wilo-Rexa PRO
Product description
Pressure connection
PRO V05...
PRO C05...
PRO V06...
PRO C06...
PRO V08...
PRO C08...
PRO V10...
PRO C10...
Suction connection
PRO V05...
PRO C05...
PRO V06...
PRO C06...
PRO V08...
PRO C08...
PRO V10...
PRO C10...
* If the required cooling of the motor is ensured before a re-activation, the operating mode
S3 50 % is permissible! To ensure the required cooling, the motor must be completely im-
mersed for at least 1 minute!
** S1 operation is dependent on the motor power. Observe and comply with the specifica-
tion regarding "non-immersed" operating mode on the rating plate!
Example: Wilo-Rexa PRO V06DA-110/EAD1F2-T0015-646-F
Series
PRO
Impeller shape
V V = vortex impeller
C = single-channel impeller
Nominal diameter pressure connection
06
Hydraulic version:
D D = suction side drilled acc. to DIN
N = suction side drilled according to ANSI
"Hydraulics" material version: standard
A
Hydraulics type
110
Motor version: surface-cooled motor
E
"Motor" material version: standard
A
Seal
D D = two mechanical seals
B = cartridge seal
IE efficiency class (based on IEC 60034‑30)
1
Ex approval
X = ATEX
F
F = FM
C = CSA-Ex
Number of poles
2
Mains connection version: M = 1~, T = 3~
T
ANSI B16.1, Size 2, Class 125
ANSI B16.1, Size 2.5/3, Class 125
ANSI B16.1, Size 3, Class 125
ANSI B16.1, Size 4, Class 125
DN 50, PN 10
DN 65, PN 10
DN 80, PN 10
DN 100, PN 10
en-US
15