Wbe 5210 - Bosch WBE 5210 Manual De Usuario

3.5

WBE 5210

13
12
1
11
3
Fig. 1: WBE 5210
Item Designation
1 On/off switch
2 Clamping tool holders
3 Power cord
4 Tray
5 Control/display panel
6 Vernier caliper
7 Wheel guard
8 Quick-action clamping nut
9 Centering flange
10 Wheel lift
10/1 Wheel lift slide
10/2 Pedal
11 Quick-action clamping nut
12 Centering flange
13 Manual vernier caliper
14 Measuring compasses
15 Service unit with com-
pressed air connection
Robert Bosch GmbH
14
4
5
15
2
10/2
Functions
Switch-on and switch-off
For storing accessories
For power connection
For storing balance weights and accessories
+ Operation of WBE 5210, refer to Section 7
+ Software display (measured values and operating instructions)
+ Recording of rim distance and rim diameter.
+ Determination of positions for attachment of adhesive weights.
+ Protection of operator against flying particles (e. g. dirt, water)
+ Starting and stopping measurement
Centering and attachment of wheel on cone
Wheel attachment.
Lifting device to assist with attachment and removal of wheel
Horizontally adjustable wheel rest
+ Left pedal: Raises the wheel rest
+ Right pedal: Lowers the wheel rest
Centering and attachment of wheel on cone
Wheel attachment.
Can be used as substitute if the electronic vernier caliper is defective.
Can be used as substitute if the rim width and rim diameter cannot be recorded electronically.
+ Checking/adjustment of operating pressure.
+ Removal of dirt.
+ Oil supply for compressed air system.
Product description | WBE 5210 | 29
6
9
10 10/1
7
8
|
1 695 654 697 2010-11-19
en