CYBEX gold CLOUD Q Manual Del Propietário página 30

USING SENSORSAFE
REPLACING THE SENSORSAFE CHEST CLIP BATTERY.
1. Loosen Harness by pressing Harness Release Button on the front of the Child Restraint and
pulling forward on both Harness Straps.
2. Unbuckle Harness by pressing the button on the Crotch Buckle and pulling out both Buckle
Tongues.
3. Open Chest Clip by pressing the Release Button and pulling the Chest Clip apart.
1
2
57
(CONT.)
™
3
USING SENSORSAFE
4. Turn the male side of the Chest Clip over and loosen screws with a small Phillips screwdriver.
a
Remove the cover .
5. Remove Circuit Board b from Chest Clip. Remove Battery
Battery with new Panasonic CR2032 Lithium button cell Battery, as shown.
™
6. Place the Circuit Board with the new Battery in the Chest Clip. Replace the Cover and tighten the
screws. This completes the battery replacement process.
If you have questions, please contact CYBEX at: 1-877-242-5676 or online at:
http://cybex-online.com/us/contact.html.
4
5
b
a
Registered trademarks referenced in this manual are the property of their respective owners.
(CONT.)
™
c from Circuit Board. Replace
b
CR2032
c
2
1
58