Leica SF 64 Manual De Instrucciónes, Uso Y Manutención página 67

Stroboscope flash frequency
f
The flash frequency indicates the number of flashes
per second. The flash frequency can be set from
. The maximum possible number of flashes is
50
adjusted automatically.
To achieve short flash intervals you can manually set
the partial light output right down to the minimum
value of .
1/256
Set flash frequency ( )
f(Hz)
1. Press the sensor button for flash frequency
on the touch display.
f(Hz)
2. Use ▲ / ▼ to move the desired flash frequency to
the central field outlined in red
3. Press selected flash frequency
The setting takes effect immediately.
• The distance valid for the set parameters is
shown in the display.
The displayed distance value can be adapted
to the distance from the subject by changing
the aperture rating or the partial light output.
No aperture or ISO ratings are displayed in
stroboscope flash mode!
Note:
The max. possible flash frequency (
partial light output set ( ).
P
to
1
) depends on the
f
EN
67