Acoustic Signal Beep - Leica SF 64 Manual De Instrucciónes, Uso Y Manutención

EN ACOUSTIC SIGNAL
The user can send an acoustic notification of some
flash unit functions with the
result, he/she can fully concentrate on the subject
and the shot and does not have to pay attentions to
additional visual status displays!
The
flash is ready or if used incorrectly.
Setting procedure
1. Press the
2. Press
3. Use
4. Press
5. Press
80
BEEP
function. As a
BEEP
function sends an acoustic signal when the
BEEP
button repeatedly until the
13
selection menu appears
on the touch menu
MENU
/ to move to the central field
▲ ▼ BEEP
outlined in red
BEEP
or to siwtch the function on or off
ON OFF
The selected setting is accepted immediately.
• After the function has been activated, is
displayed in the menu .
INFO
Acoustic message after the flash unit has been
switched on:
A short (approx. 2s) uninterrupted sound after
switching on, indicates that the flash unit is ready.
Acoustic messages for the settings in automatic flash
mode:
A short sound as an alarm is emitted if the aperture
and ISO setting would result in the permitted light
control range not being met. The automatic aperture
is automatically changed to the next permitted value.