Zoom Mode Zoom Mode - Leica SF 64 Manual De Instrucciónes, Uso Y Manutención

EN ZOOM MODE
STANDARD
In
reflector is adjusted to the camera's lens focal length.
In
reflector is changed by one stage in comparison to
the camera's lens focal length, with
reduced and enlarged with
The extended and larger-area illumination that results
with
(reflections) in rooms and thus softer flash illumina-
tion.
Example:
The lens focal length at the camera is 50mm. The
flash unit moves the reflector to zoom position
35mm.
The reduced illumination that results with
ensures center-focused illumination or shaded edge
lighting.
Example:
The lens focal length at the camera is 50mm. The
flash unit moves the reflector to zoom position
70mm. 50mm is still shown in the display.
76
ZOOM MODE
-, , or zoom mode
SOFT SPOT
zoom mode the zoom position of the
Standard
or mode, however, the position of the
SOFT SPOT
SOFT
.
SPOT
provides additional scattered light
SOFT
is still shown in the display.
50mm
it is
SPOT
Setting procedure
1. Press the button 13 repeatedly until the
selection menu appears
2. Press the sensor button on the touch
MENU
menu
3. Use ▲ / ▼ to move
ZOOM MODE
outlined in red
4. Press
ZOOM MODE
,
5. Press or
STANDARD SOFT SPOT
desired function
The selected mode is accepted immediately.
Notes:
• The camera must be fitted with a CPU lens and
deliver the data for the lens focal length to the
flash unit.
• For systemic reasons, the spot zoom mode is
supported for lens focal lengths of 24 mm to
180mm (35mm format).
to the central field
to switch on the