How It Works - Franklin Electric SubDrive15 Manual De Uso

SubDrive/MonoDrive
In the Box
A. Controller Unit
B. Pressure Sensor and Boot
C. Sensor Adjustment Tool
D. Sensor Cable
E. Installation Guide
F. Strain Relief Fitting

How it Works

The Franklin Electric SubDrive/MonoDrive is designed to be part of a system that consists of
only four (4) components:
A. Standard Pump and Franklin Electric Motor
B. SubDrive/MonoDrive Controller
C. Small Pressure Tank (see Table 3, page 20)
D. Franklin Electric Pressure Sensor (NSF 61 approved)
Power Supply
from Circuit Breaker
12
B
Pressure
Relief Valve
PUMP
A
MOTOR
Power to Motor
Pressure
C
Sensor
Leads
D
Pressure Sensor must be
installed in the upright and
vertical position with the
rubber boot installed.
Pressure Sensor