Apex XT Fit Manual De Instrucciones página 10

English
3. Installation
English
3.1 Unpacking
To secure its contents inside, the CPAP device and accessories are bundled in a paper-packaged
box. Unpack this box by removing the CPAP and its accessory and checking for any damage,
which may have occurred during shipping. If there are damages, please contact your dealer
immediately.
3.2 Setting Up
1) Connect the power cord to CPAP device and
plug into main electrical outlet.
Once the power cord is plugged into the
electrical outlet, the device is in ready to operate
position ("STANDBY" sign appears in LCD
display)
NOTE: The plug is also served to
disconnect
the device.
2) Connect one end of the air tubing firmly onto the
air outlet of the CPAP.
3) Connect the other end of the air tubing to the
mask
system. Putting on the mask and headgear
according to the mask instruction manual.
6