Cleaning & Maintenance; Cleaning The Main Unit - Apex XT Fit Manual De Instrucciones

English
5. Adding a Humidifier
English
NOTE: When XT Fit CPAP device is used with the heated humidifier, its power supply is
from the power socket outlet of the heated humidifier. DO NOT connect the power cord to
CPAP device and plug into main electrical outlet.
6. Cleaning & Maintenance

6.1 Cleaning the Main Unit

The main unit should be cleaned regularly (at least every 30 days). To clean the unit, wipe it down
with a damp cloth using a mild detergent. When selecting a cleaning agent, take precautions to
choose one that is not chemically abrasive to the surface of the plastic case. All parts should be
air-dried thoroughly before use. During storage, the unit should be kept in a dust-free location.
WARNING: Don't try to open this device. Repairs and internal servicing should only
6.2 Tubing and Mask
The tubing and mask should be checked and cleaned daily. Please refer to the cleaning instruction
packaged with the accessories.
1. Disconnect the air tubing from the air outlet of the device.
2. Remove the air tubing and headgear straps from the nasal mask.
3. Use a mild detergent and prepare the detergent according to manufacturer's
recommendations. Tubing and mask can be washed and rinsed in warm water.
4. Rinse thoroughly and make sure they are completely dry before next use.
5. All items of the mask and air tubing are subject to normal wear and tear and may eventually
be replaced. Replace the mask and the air tubing if they are damaged.
CAUTION:
XT Fit CPAP device can be used with XT Heated Humidifier
(9S-006500) which is available from the home care provider.
The heated humidifier may reduce nasal dryness and irritation
by providing adequate moisture and heat to the airflow. Please
refer to the XT heated humidifier (9S-006500) instruction
manual for complete setup information.
performed by an authorized service agent. Don't drop any subject into the air
tube or air outlet.
Do not use blench, chlorine-, alcohol-, or aromatic-based (including all
scented oils), moisturizing or antibacterial soaps to clean the cushion,
mask, air tubing. These solutions may cause hardening and reduce the life
of the product.
11