Airwell FAV012 Manual De Instrucciones página 21

Operation instruction
Query indoor malfunction history:
of unit on or unit
In the state
all indoor units in the group. Then [CHECK] and [UNIT NO.] will display, and the actualindoor
numbers will be displayed in some sequence (unit number is in decimals). At the sametime, in
the time region, there will be the current malfunction and the latest time malfunction, the
displaying format is [XX:YY], in which XX stands for the current malfunction, if normal, it will
display "--"; YY stands for the latest time malfunction. The failure code of every unit will display
for 3 seconds. After the failure codes of all indoor units in the whole group are displayed, the
mode will quit automatically.
How to change the function switches?
No. Type
Select the master or
SW1-1
the slave controller
Select the controller
SW1-2
mode
Room temperature
SW1-3
display option
o
SW1-4 26 lock
Temperature sensor
SW1-5
position option
SW1-6 Auto restart
SW1-7 Factory Seting
SW1-8 Factory Setting
Note
1. Switches or jumper wire must be adjusted when the wire controller is powered off. If the wire
controller is powered on, the above operations will be invalid.
2. Function difference between master wire controller and slave one:
Contrastive Master wire
items controller
Function All of functions
off, press [CHECK] button, enter the malfunction-queryingmode of
State of switch
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Slave wire controller
Only with below functions:
ON/OFF, MODE, FAN SPEED, SET TEMP., SWING
13
Function description
ON set as the slave controller
set as the master controller
ON
standard controller
air handler controller
ON
visible room temperature
invisible room temperature
ON
Unavailable 26
available 26
ON Sensor of the controller
Sensor in the unit
ON unavailable
available
ON default setting
default setting
o
lock
o
lock