Basic Operations; Turning The Power On And Off; Eco Mode (Eco) - JVC MX-KC50 Manual De Instrucciones

Basic Operations

Numeric
keys
DISPLAY
SOUND
TURBO
SOUND
MODE

Turning the Power On and Off

Turning the System On
1
Press the STANDBY/ON button.
The display comes on and "POWER ON" is displayed once.
The STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in
when the power was last turned off.
Turning the System Off
1
Press the STANDBY/ON button again.
"GOOD BYE" is displayed and the display goes out, except
for the clock display. The STANDBY indicator lights up. (The
display is dimmed.)
• Some power is always consumed even though power is
turned off (called Standby mode).
• To switch off the System completely, unplug the AC power
cord from the wall outlet. When you unplug the AC power
cord, the clock will be reset to 0:00 immediately.
7
STANDBY/ON
STANDBY indicator
(STANDBY/ON)
ECO
SOUND TURBO
PHONES
VOLUME +, –
FADE MUTING
Sound Turbo indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
or
or
Various information
Status bar (Indicates various statuses.)

ECO Mode (ECO)

The System has three energy modes; power on, power off (Stand-
by) and ECO. In ECO mode, the display goes off and the least
power is consumed.
To enter ECO mode, press the ECO button on the Unit in Stand-
by mode (while the STANDBY indicator lights up). "ECO
MODE" appears on the display, then the display goes off. The
STANDBY indicator remains lit.
To cancel ECO mode and turn on the power, press the
STANDBY/ON button on the Unit.
To cancel ECO mode and enter Standby mode, press the
ECO button again.
Display
SOUND MODE
VOLUME
Sound Mode indicator
Level bar