Changing The Display Color - JVC KD-LH1000 Manual De Instrucciones

Changing the display color

You can set the display color using the PSM
control. By selecting "Source" for "Mode," you can
select your favorite color for each source (or for
all sources).
Note:
When selecting "User," you can create your own color
as you like. See pages 26 and 27.
Setting the desired color for each
source—Source
Once you have set the color for each source (or
for all sources), the display illuminates in the
selected color when the source is selected.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 23.)
2
Press 5 (up) or ∞ (down) repeatedly
until "Color" appears as the PSM
category on the left side of the
display.
3
Select "Mode."
Currently selected setting for "Mode"
4
Select "Source" for "Mode."
As you turn the control
dial, the "Mode"
settings change as
follows:
Source User
5
Enter the source selecting mode.
Currently selected source for "Source"
6
Select the source that you want to set
the display color for.
As you turn the control dial, the source
names change as follows:
2
*
All Source
AM
1
* When you select "All Source," you can use the
same color for all sources.
2
* Selected only when these components are
connected.
1
*
CD
2
*
Changer
FM
(Line In)
25