BWT Infinity A Instrucciones De Montaje página 18

GB GB
GB GB GB
18 18 18 18 18
Set Set
Set Press Set Set
Wait 10 sec. Dots stop flashing.
Set Set Set Set Set
The pressure appears in the display
0.0 P 0.0 P
0.0 P 0.0 P, when no water is used. 0.0 P
A third filter must be set to SL 2
Disconnect and reconnect all filters to the mains.
The filters will be backwashed in sequence: Master
SL 1, SL 2 SL 1 SL 1 SL 1 SL 1 SL 2 and SL 3 SL 2 SL 2 SL 2
The time until the next backwashing time until the next backwashing and the time until the next backwashing time until the next backwashing time until the next backwashing
pressure difference appear alternately in the mas- pressure difference pressure difference
pressure difference pressure difference
ter filter display. The pressure difference is only
displayed for large volumes of water.
Only the pressure difference Only the pressure difference
Only the pressure difference Only the pressure difference Only the pressure difference appears in the slave
filter display.
The filters are ready for use.
Operation Operation
Operation Operation Operation
We recommend programming the filter so that We recommend programming the filter so that We recommend programming the filter so that We recommend programming the filter so that We recommend programming the filter so that
the device is backwashed at least once a month the device is backwashed at least once a month
the device is backwashed at least once a month the device is backwashed at least once a month the device is backwashed at least once a month
to prevent foreign particles from adhering to to prevent foreign particles from adhering to to prevent foreign particles from adhering to to prevent foreign particles from adhering to to prevent foreign particles from adhering to
the filter element (more frequently for higher the filter element (more frequently for higher
the filter element (more frequently for higher the filter element (more frequently for higher the filter element (more frequently for higher
levels of soiling; factory setting every 7 days). levels of soiling; factory setting every 7 days). levels of soiling; factory setting every 7 days). levels of soiling; factory setting every 7 days). levels of soiling; factory setting every 7 days).
Setting the backwash interval Setting the backwash interval Setting the backwash interval Setting the backwash interval Setting the backwash interval
see Starting the unit
Manual backwashing Manual backwashing Manual backwashing
Manual backwashing Manual backwashing
Unplugging and plugging in the device can back-
wash it at any time.
Display Display Display Display Display
displays the time until the next backwashing.
Infinity AP only Infinity AP only
Infinity AP only Infinity AP only Infinity AP only
The time until the next backwashing time until the next backwashing time until the next backwashing time until the next backwashing and the time until the next backwashing
pressure diff pressure difference pressure diff
pressure diff pressure diff
pressure difference is only displayed for large vol-
umes of water.
When operating in parallel, the slave filter only dis-
plays the pressure difference.
Cleaning Cleaning Cleaning Cleaning Cleaning
Clean plastic parts with a soft, damp cloth only; do
not use solvents, detergents, or acidic cleaning
agents.
SL 1 SL 1
SL 1 SL 1 SL 1
SL 2 SL 2
SL 2 SL 2 and a fourth to SL 3
SL 3 SL 3 SL 3 SL 3.
erence erence are displayed alternately. The erence
erence
SL 3 SL 3
SL 3. SL 3
Master Master
Master, Master