miniland baby digitalk premium Manual De Instrucciones página 34

Even if you do not stop the lullaby, it will automatically stop playing after
15 minutes.
5.3.3. Sound Sensitivity
Some babies are louder than others! You can customize the sound sensitivity
of your Baby Monitor to suit your baby. Set the sensitivity "High" for a quiet
sleeper with a soft cry and set to 'Low' sensitivity if they tend to make noise whilst
sleeping or can make quite loud noises before they are truly crying.
To set the sound sensitivity, at the Parent Unit:
- Press the Menu Key (1).
- Use the Up/Down Keys (5 and 6) to scroll to [Sensitivity]. Press the OK Key (3).
The display shows [Level] and a row of blocks indicating the volume level (full
= high sensitivity).
- Use the Up/Down Keys (5 and 6) to select the sensitivity level. Press the OK
Key (3). The display briefly shows [Saved].
5.3.4. Sound alert
The parent unit can give an extra warning 'beep' when the noise levels in your
baby's room activate the light on the sound sensor (9). This is particularly useful
if the volume of your parent unit is turned down and you are just using the sensor
light (9) to monitor the noise levels in your baby's room.
To activate the sound alert, on the Parent Unit:
- Press the Menu Key (1) then use the Up/Down Keys (5 and 6) to scroll to [Sound
Alert].
- Press the OK Key (3). The display shows [On?].
- Press the OK Key (3) to turn the alert on or Menu Key to exit without change.
The Display will briefly show [Saved] and a confirmation tone sounds.
If you want to change the volume level of the alarm tone:
- Press the Menu Key (1) and navigate to the [Sound Alert] Menu.
- Press the OK Key (3) and navigate to the [Volume] Menu and press the
OK Key (3) and adjust the volume. The display shows [Level] and a row of
blocks representing the volume of the Baby Alert tone.
- Use the Up/Down Keys (5 and 6) to select the required volume level (full =
loudest). The display will briefly show [Saved]. An alert tone will now sound at the
Parent Unit should your baby's noise levels reach the red in the LED.
34