miniland baby digitalk premium Manual De Instrucciones página 36

- Use the Up/Down Keys (5and 6) to scroll to [Temperature].
- Press the OK Key (3).
- Use the Up/Down Keys (5 and 6) to scroll to [Set Range].
- Press the OK Key (3). The current upper temperature range is displayed as [Up
Limit xx].
- Use the Up/Down Keys (5 and 6) to scroll up or down the temperature setting
until you reach the number of degrees you wish to set as the maximum.
- Press the OK Key (3). The display briefly shows [Saved]. The lower range limit
is now displayed as [Low Limit xx].
- Use the Up/Down Keys (5 and 6) to scroll up or down the temperature settings
until you reach the number of degrees you wish to set as the minimum.
- Press the OK Key (3). The display briefly shows [Saved].
You have now set your minimum and maximum temperature range.
5.3.6.2. Setting the Temperature Alert
If you wish, you can set your Parent Unit to give an additional double 'beep' war-
ning to alert you that the temperature has moved outside of the set temperature
range.
To set this, at the Parent Unit:
- Press the Menu Key.
- Use the Up/Down Keys to scroll to [Temperature]. Press the OK Key (3).
- Use the Up/Down Keys (5 and 6) to scroll to [Temp Alert].
- Press the OK Key (3). The display will show [On?].
- Press the OK Key (3) to turn the alert on, or Menu Key (1) to exit without change.
Display briefly shows [Saved]. The Temperature alert is now on.
If you wish to turn the Temperature Alert:
- Follow the instructions above.
- At step 4 the display will show [Off?]. Press the OK (3) Key to confirm.
5.3.6.3. Changing from Centigrade to Fahrenheit
You can choose whether to view the temperature of your baby's room in degrees
Centigrade or degrees Fahrenheit. Your monitor is pre−set to Centigrade, but if
you wish to change it, please follow the steps below.
To set this, at the Parent Unit
- Press the Menu Key (1), then use the keys to scroll to [Temperature].
36