To select the 12 or 24 hour clock format, at the Parent Unit:
- Press the Menu Key (1).
- Use the Up/Down Keys (5 and 6) to scroll to [Clock].
- Press the OK Key (3). The display shows [Set time].
- Press the Up/Down Keys (5 and 6) to scroll to [Hour Format].
- Press the OK Key (3). The display shows [12 Hrs?] (asking if you would like to
change to the 12 hour clock format).
- Press the OK Key (3) or if you do not want to change, press the Menu Key (1)
to exit without changing. The display briefly shows [Saved] to confirm that the
12 hour clock has been set. Time displayed in the 12 hour clock format will
include a small "a" to denote AM and a small 'p' for PM.
To change back to the 24 hour clock format:
- Repeat the steps above, at step 5 the display will show [24 Hrs?].
- Press the OK Key (3) to confirm.
5.3.8. Feed Timer
If your baby is in a routine of regular feeding intervals, you may wish to set your
Baby Monitor to alert you when your baby's feeds are due. You have the choice to
either set an alert just for your baby's next feed time, or for your baby's next feed
time plus subsequent feeds based on the interval time between them.
Firstly you will need to ensure that you have set the date and time on your Parent
Unit's inbuilt clock.
Once you have done this, you can either:
a. Set the Time of day or night (24hr clock) at which your baby's next feed is due
(for example 10:30)
b. Set the Interval between your baby's following feed start times, (for example
every 3hrs 30mins). Be sure to include the time it takes to feed your baby.
Finally, you will need to switch the Feed Alarm on. Now, when your baby's next
feed is due, your Parent Unit will start beeping and the display will show [Feed
Alarm]. Pressing any button on the Parent Unit will silence the alert and you can
feed your baby. If you have set the interval, the alert will sound again when the
next feed is due.
To set the first or next feed time, at the Parent Unit:
- Press the Menu Key (1).
- Use the Up/Down Keys to scroll to [Feed Time].
38