miniland baby digitalk premium Manual De Instrucciones página 37

- Press the OK Key (3).
- Use the Up/Down Keys (5 and 6) to scroll to [Degree F?].
- Press the OK Key (3) to select Fahrenheit or Menu Key to exit without change.
Display will briefly show [Saved]. The temperature of your baby's room will now
be shown in degrees Fahrenheit.
If you wish to change the temperature display back to degrees Centigrade:
- Follow the above steps.
- At step 3 the display will show [Degree C?].
- Press the OK Key (3).
5.3.7. Clock
You can set the Display of the Parent Unit to show the current date and time.
This can be shown as either the 24 or 12 hour clock (your monitor is pre−set to
show the 24 hour clock). You will need to set the clock if you wish to use the Feed
Timer feature.
If you have unplugged your Baby Monitor from the power supply, you will need to
reset the Clock the next time you use it.
To set the time, at the Parent Unit:
- Press the Menu Key (1).
- Use the Up/Down Keys (5 and 6) to scroll to [Clock].
- Press the OK Key (3). The display shows [Set time].
- Press the OK Key (3). The display shows [Year].
- Use the Up/Down Keys (5 and 6) to scroll to the correct year.
- Press the OK Key (3). The display shows [Month].
- Use the Up/Down Keys (5 and 6) to scroll to the correct month.
- Press the OK Key (3). The display shows [Day].
- Use the Up/Down Keys (5 and 6) to scroll to the correct day.
- Press the OK Key (3). The display shows [Hour].
- Use the Up/Down Keys (5 and 6) to scroll to the correct hour using the 24 hour
clock.
- Press the OK Key (3). The display shows [Minute].
- Use the Up/Down Keys (5 and 6) to scroll to the correct minute.
- Press the OK Key (3). The display briefly shows [Saved] and gives a confirming
'beep'. The date and time will now be displayed on the Parent Unit.
37