Thermador PROFESSIONAL SERIE Operating And Installation Manual página 6

Parts Included
1 – Metal transition with backdraft
damper
2, 3, or 4 – Stainless steel baffle filters
(depending on model size)
2 – Filter spacers
2 or 3 – Grease trays (depending on
model size)
2 or 4 – Halogen lights (installed)
2 – 175W Heat lamps (on some
models)
1 – Remote blower adaptor
1 – Wooden bracket used as Hood
Mounting Bracket (part of install- DO
NOT THROW AWAY)
1 – Fastener assortment
Literature packet
English 4
Tools and Parts Needed
Aluminum tape (DO NOT use duct tape)
1/2'' (13 mm) Conduit if required (follow local codes)
1'' (25.4 mm) Strain relief
EXTNCB25 – 25 ft. Blower Connector Cable for distances
up to 25 ft.
Ducting as needed
Blower
Flat head and phillips screwdrivers
Drill with 3/16'' (4.76 mm) drill bit
3/8'' (9.52 mm) nut driver or socket and ratchet
Wire stripper
Protective work gloves
Optional accessories available for separate purchase.
Refer to www.thermador.com for more details.
Duct Cover
Keep Hot Shelf
Backsplash
Note: Do not throw away any packaging until appliance is
fully installed.