Tennant 5400 Manual Del Operador página 12

OPERATION
2. Adjust control console to a comfortable operating
height, 5 settings. To adjust height, pull control
console trigger and lift or lower console to desired
height, release trigger to lock position (Figure 16).
FIG. 16
3. Turn the key and solution switch to the ON
position.
4. To conventional scrub with a FaSTt model, make
sure the FaSTt system switch is in the off (O)
position (Figure 17).
FIG. 17
5. Lower squeegee assembly to floor using the
squeegee lift lever, vacuum motor will
automatically turn on (Figure 18).
FIG. 18
12
Home Find... Go To..
6. Press top half of brush pressure switch to lower
scrub head to floor (Figure 19).
FIG. 19
NOTE: The brushes and solution will start when
control grips are rotated.
7. Turn speed control knob to slowest setting
(Figure 20).
FIG. 20
8. Rotate control grips completely forward and
gradually turn speed control knob to a desired
maximum scrubbing speed (Figure 21).
FIG. 21
Tennant 5400 (05–03)