Main Menu - JVC DT-E21L4 Manual De Instrucciones

Monitor lcd multiformato
Ocultar thumbs Ver también para DT-E21L4:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 132
Menu Configuration (cont.)

Main Menu

Picture Function
Setting for the picture quality.
Item
To do
Backlight
Adjusts the brightness of the display.
Aperture*
1
Activates/deactivates the function at the level set in "Aperture Level".
Aperture Level*
1
Compensate the frequency response of the luminance signal of the video signal.
CTI
Adjust the clearness of the outlines of the chrominance signal.
LTI
Adjust the clearness of the outlines of the luminance signal.
Gamma
Select the Gamma correction value.
Color Temperature
Select the color temperature.
sub menu
Display the sub menu which enables you to adjust the items in "Picture Function" while viewing the actual picture.
reset
Restore the default settings for all the items in "Picture Function".
*
Memorized for each input.
1
Size/Position Adjust
Adjusts the size and position of the picture.
Item
To do
Auto Adjust
Activate/deactivate the function to adjust the optimized position for each input signal.
H Size*
Adjust the horizontal picture size.
1
H Position*
1
Adjust the horizontal picture position.
V Size*
Adjust the vertical picture size.
1
V Position*
1
Adjust the vertical picture position.
Dot Clock*
1
Adjust "Dot Clock" and "Clock Phase" alternately when the displayed picture becomes
unstable or streaked.
Clock Phase*
1
sub menu
Display the sub menu which enables you to adjust the items in "Size/Position Adjust" while viewing the actual picture.
reset
Restore the default settings for all the items in "Size/Position Adjust".
*
1
Memorized for each signal format.
Aspect
Sets the aspect ratio of the screen for displaying videos.
Item
To do
Auto Aspect
Select whether to adjust the aspect ratio (horizontal to vertical ratio of the screen) of the SD
signal automatically or manually (Manual Aspect).
Manual Aspect*
1
Sets the aspect ratio (horizontal to vertical ratio of the screen) of the SD signal.
SD4:3 Size*
Selects the picture size when the input signal format is 4:3.
1
Normal
H Full
*
1
Not activate when picture is displayed in the 1:1 mode.
14
:
Matches the vertical picture size to the number of pixels.
:
Matches the horizontal picture size to the horizontal size of the screen. At
this time, the top and bottom of the picture are overscanned.
Setting value
–20 to +20
Off, On
01 – 10
Off, Normal, Hard
Off, Normal, Hard
2.2 (equivalent to Υ 2.2),
2.35 (equivalent to Υ 2.35),
2.45 (equivalent to Υ 2.45),
2.6 (equivalent to Υ 2.6)
9300K, 6500K, User
Setting value
Setting value varies
depending on the signals.
–32 to +32
Setting value
Off, On
16:9, 4:3
Normal, H Full

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dt-e17l4g

Tabla de contenido