Annunciator Buttons; Enter The Software License - Hach Event Monitor Trigger System Manual Básico Del Usuario

Annunciator buttons

When agent events, plant events, system errors or sensor errors occur, the annunciator buttons will
change color and/or flash. Refer to
level. Refer to Table 6.
Push the annunciator button to see information about the condition. Refer to
alarms on page 23 for alarm descriptions.
Events and errors continue to show on the annunciator button screen until the event/error condition is
resolved or the event/error is manually removed from the screen. A log of all the events and errors
that have occurred is available from the Maintenance menu.
Annunciator button
PLANT (plant event)
SYSTEM (system error)
SENSORS (sensor error)
1
AGENT (agent event)
1
Shows only when the agent library is available.
Priority Caused by
Normal Event
Alert Event or error Typically, a known situation. Investigation may be necessary to identify the
Alarm (highest level) Event or error A known or unknown situation where immediate investigation must be
Navigation
All functions are through the touchscreen. Do not use the writing tips of pens or pencils or other
sharp objects to make selections on the screen. Use only a clean, dry finger tip or the eraser end of a
pencil.
Graphs
To temporarily change the range shown on the x-axis or y-axis, drag the axis up, down, left or right.
To zoom in on a single graph, double-tap on the graph. The graph shows in a separate window. The
minimum, maximum and average sensor values and alarm settings also show in the window. To
change the sensor graph shown, select a different sensor in the Select Sensor field.
Startup

Enter the software license

Contact customer support to get a license key. Supply technical support with the serial number and
system ID of the monitor.
1. Push MAINTENANCE.
2. Enter the user name and password, then push OK.
3. Push License.
Shows the serial number of the monitor and system ID.
4. Enter the license key supplied by customer support, then push Apply.
Table 5. The color of the annunciator buttons identify the priority
Table 5 Annunciator button colors
Normal
Blue
—
—
Blue
Table 6 Notification priority levels
Description
Action is typically necessary. The event is recorded. The event is because
of normal operating conditions, such as a valve opened or closed.
cause.
done to identify the cause.
Note: All unknown events are automatically assigned the Alarm priority level.
System and sensor
Stable Alert
Green Flash yellow
Green Flash yellow
Green Flash yellow
Green Flash yellow
Alarm
Flash red
Flash red
Flash red
Flash red
English 13