Hach Event Monitor Trigger System Manual Básico Del Usuario página 12

Figure 6 Main Menu
1 Top of screen
2 Sensor graphs
Area Description
Top of screen Shows the site name, the user, the access rights of the user, the date and time and the
software version number.
Sensor graphs Shows the individual sensor values over time. Shows the sensor name and current value
at the top of each sensor graph.
Graph options button Push to change the sensor graph settings and/or change the sensor graphs.
Task buttons CONFIGURATION—Change the sensor alarms, plant event settings, site information,
users and roles, passwords, logging intervals and digital communication settings.
MAINTENANCE—Manage the data logs, set the trigger signal to off, reset the baseline,
sample, shutdown the monitor, install a software update.
Trigger graph Shows the trigger signal value over time and the selected plan event threshold and agent
event threshold (horizontal lines).
Annunciator buttons PLANT—Shows the plant event report. Select an entry, then push Vector Data to see the
parameter deviations that caused the event.
SYSTEM—Shows the system error log.
SENSOR—Shows the sensor error log.
The color of the annunciator buttons changes when an event or error occurs. Refer to
Annunciator buttons
12 English
3 Graph options button
4 Task buttons
Table 4 Screen area description
on page 13.
5 Trigger graph
6 Annunciator buttons