Electrical Installation; Wiring For Power - Hach Event Monitor Trigger System Manual Básico Del Usuario

Personal injury hazard. Make sure that the wall mounting is able to hold 4 times the weight of the
equipment.
Attach the monitor to a wall or a free standing rack. Refer to
30.5 cm (12 in.) on all sides (front, top, sides and bottom).
Note: The manufacturer recommends that metal framing, such as Unistrut
Items to collect: Four
Figure 2 Dimensions
1 Touch screen
2 USB connector

Electrical installation

Electrocution hazard. Always remove power to the instrument before making electrical connections.

Wiring for power

Electrocution hazard. Protective Earth Ground (PE) connection is required.
Electrical shock and fire hazards. Make sure to identify the local disconnect clearly for the conduit
installation.
Potential Electrocution Hazard. If this equipment is used outdoors or in potentially wet locations, a
Ground Fault Interrupt device must be used for connecting the equipment to its mains power source.
W A R N I N G
3
/ in. x 2 in. bolts for wall mounting.
8
W A R N I N G
Figure
®
, is used for mounting.
3 Wire openings (4x)
4 Conduit opening
D A N G E R
D A N G E R
D A N G E R
2. Keep a minimum clearance of
English 7