Tabla de contenido
Publicidad
FITTING YOUR CAR SEAT INTO THE CAR
1
2
3
4
5
21
Seggiolino BIKINI Plus
english
Step 1
Place the car seat on the passenger seat in the rear-facing position,
as shown in the figure.
Step 2
Pass the lap belt of the vehicle through both the special loops which
are placed on the car seat.
Step 3
Insert the tab into the buckle until you hear a "click"; check and
make sure the tab is secured by trying to pull on the belt.
Step 4
Pass the diagonal belt through the special loop placed on the back
of the car seat.
Take out all the slack in the seat belt, ensuring that there are no
twists or kinks in the seat belt.
Step 5
The correct positioning of the adult seat belt buckle with respect to
the car seat is that shown in fig. 5. Please do not hesitate to contact
us for any questions relating to this.
Publicidad
Tabla de contenido
