Suunto ADVIZOR Manual De Instrucciones página 38

Note: In selecting the interval, the user chooses a) the time period for recording the altitude, the vertical ascent/
descent rate as well as the heart rate to be stored into the logbook and b) the timeout or maximum recording
time of a logbook. The shorter the interval the more accurate the information due to the fact the sampling rate
is faster. Timeouts are discussed below.
Note: If the logbook is recording, based on the interval chosen, the logbook will record up to that particular time
period. Once the time period has been reached, the Wristop Computer will alert the user that the logbook
recording has expired (known as a timeout). For setting the logbook interval refer to Setting the Altimeter on
previous page.
The timeouts are as follows:
L O G B O O K IN T E R V A L
2 0 S e c o n d
1 m in u t e
1 0 m in u t e
6 0 m in u t e
9. At the desired interval, PRESS the [Mode] button to accept the changes and exit the setup program.
Once the user completes the process in setting the reference altitude of the current location to the known
altitude, the Wristop Computer will also correct the sea level pressure, and therefore, it will not be necessary for
this function to be set.
Note: If the user does not press any button for 1 minute in the setup mode, the display will automatically exit
setup.
Note: A 10 minute recording interval means that the Wristop Computer records data every 10 minutes.
M A X . C O N T I N U O U S R E C O R D IN G T IM E
1 0 h o u r s
1 2 h o u r s
7 d a y s
1 0 d a y s