Pressure Difference Measurement Sub Mode - Suunto ADVIZOR Manual De Instrucciones

• difference measurement function allows zeroing of the barometer for following e.g. overnight changes in
barometric pressure and temperature;
• an automatic 4-day memory of atmospheric pressure for the last 6 hours in 1-hour intervals, thereafter, in 6-
hour intervals;
• temperature compensation (temperature does not effect the pressure within the specified temperature range)
• a temperature range from -20° to 60°C or -5° to 140°F; and
• a temperature resolution of 1° C or F.
Note: Body Heat will effect temperature when the Wristop Computer is worn on the wrist. To achieve an accurate
reading remove the Wristop Computer from the wrist and allow at least 15-30 minutes before reading the
temperature.
To view and use the Barometer function:
Check the Mode Indicator arrow. If the mode arrow is not on BARO, PRESS the [Mode] button until the arrow
is directly below BARO.
In the Barometer mode (Fig. 45):
• Field 1 displays the current temperature.
• Field 2 displays the current absolute atmospheric pressure.
• Field 3 displays the current time.
• The Outer Circumference graphically displays the atmospheric pressure over 100 millibars or 1 inHg where
one complete circle is equivalent to 100 mbar/1 inHg, depending on the unit of measure chosen.
Note: The absolute pressure is the actual pressure in any location at any given time. Whereas, sea level
pressure is the corresponding pressure at sea level.
Note: The absolute pressure is depending on current altitude and weather.

5.1 PRESSURE DIFFERENCE MEASUREMENT SUB MODE

The pressure difference is not referring to the sea level pressure, but to the current barometric pressure measured
by the watch.