Description Of Controls; Switching The Appliance On And Off - Angelo Po 0G1FT2E Manual De Uso E Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

DESCRIPTION OF CONTROLS

The appliance is fitted with
the controls for use of its
main functions.
A)Heating element control
knob: for turning the
heating elements off and
on and setting their level.
B)Mains
light:
indicates
that the appliance is re-
ceiving electrical power.
C)Temperature
comes on to warn that the
plate is not yet at the pre-
set temperature. The light
goes out once the tem-
perature is reached.
D)Thermostat light: indi-
cates that the safety thermostats have tripped.
The light goes out once the appliance has been
reset.

SWITCHING THE APPLIANCE ON AND OFF

Lighting
The first time the griddle is switched on, wash the
plate to remove the protective grease and any dirt,
then switch on the appliance and preheat it for
about 2 hours at the temperature of 195°C.
1 - Turn on the appliance's circuit breaker to con-
nect it to the electrical mains.
2 - Turn the knob (A) clockwise (pos. 1) to the tem-
perature required to turn on the heating ele-
ments. The lights (B-C) come on; when the
working temperature is reached, light (C) goes
out.
Important
For appliances with chromium-plated and
compound plate, preheating of about 30
min. to the temperature of 190°C is neces-
sary the first time the appliance is switched
on each day.
Turning off
1 - Turn the knob (A) anti-clockwise (pos. 2) to turn
off the heating elements.
A
light:
Off marker
A
C
C
B
A
D
Temperature marker
2 - Turn off the appliance's circuit breaker to dis-
connect it from the electrical mains.
- 7 -
C
B
D
IDM-39613400500.tif
C
1
A
2
IDM-39613400600.tif
English
B
IT
GB
DE
FR
ES

Publicidad

Tabla de contenido
loading

Tabla de contenido