Resetting The Appliance; Lengthy Downtimes Of Appliance - Angelo Po 0G1FT2E Manual De Uso E Instalación

RESETTING THE APPLIANCE

If the safety thermostat is tripped, the appliance has
to be restored to the initial working conditions as fol-
lows.
1 - Press the button (A) of the safety thermostat
tripped to restore the electricity supply.
FITTING THE SPLASH GUARD FRAME
To carry out this opera-
tion, proceed as fol-
lows.
1 - Fit the rear frame
(A) into the groove
provided.
2 - Fit the side frames (B)
by inserting the pins into
the slots in the rear
IT IT
frame.
GB GB
DE DE
Important
To clean, remove the splash guard frame
FR FR
and put it in a dishwasher.
ES ES

LENGTHY DOWNTIMES OF APPLIANCE

If the appliance is to be out of use for a lengthy pe-
riod, proceed as follows.
1 - Cut off the mains electricity supply using the ap-
pliance's master switch.
2 - Clean the appliance and the surrounding areas
thoroughly.
English
B
3 - Spread a film of edible oil over the stainless
steel surfaces.
4 - Carry out all the servicing procedures.
5 - Cover the appliance and leave a few gaps to al-
low air to circulate.
- 8 -
A
IDM-39613400700.tif
A
IDM-39613400800.tif