Quality Control - Cebora WIN TIG DC 220 M Manual De Instrucciones

To return to the previous list, select and confirm the sec-
tor return to the previous screen.
To return to the main screen, press knob B (do not re-
lease immediately) (> 0.7 sec.)

9.5 QUALITY CONTROL

This function enables checking that the arc voltage re-
mains within preset values
OFF corresponds with disabled function. If, during weld-
ing, the voltage does not correspond to the values set,
the wording QUALITY CONTROL appears. Press knob B
to return to the welding screen.
10 SAVED PROGRAMS (L JOB SECTOR)
A welding spot and its parameters (process, ignition,
mode etc.) can be saved within the JOB sector so that
the welder may access them again.
28
LEGEND of SYMBOLS
Select mini-
mum volt-
age (MIN. V)
or maximum
v o l t a g e
(MAX. V.),
then confirm
10.1 SAVE A WELDING SPOT. (JOB)
to set inter-
)
vention val-
ue.
Select and
confirm the
JOB sector.
To return to the main screen, press knob B (do not re-
lease immediately) (> 0.7 sec.)
save
restore
delete
copy
Press and se-
lect the mem-
ory number
in which the
program is to
be saved.
In this exam-
ple, no. 1
Confirm the
choice that
is highlight-
ed in green.
To save the
program in
memory 1,
select and
confirm the
icon, save,
and then
confirm