Babyauto ST-4 iSIZE Manual De Uso página 14

installed so that they cannot be trapped by a moving seat or a door during
everyday use of the vehicle.
15. Do not disassemble, modify, or add any piece to the child seat or harness,
as this would seriously affect its basic functioning and the safety that the
child seat provides.
16. The safety seat must remain installed in the vehicle with the safety belt,
even if the child is not seated in the child seat. The child must never be
left unattended while seated in the safety seat, not even outside the
vehicle.
17. Keep the safety seat away from corrosive products.
18. Do not use anchor points that are not listed in the instruction manual and
indicated on the seat.
19.The seat should be replaced after undergoing the violent stresses
associated with an accident.
20. The manufacturer guarantees the quality of its products, but not
the quality of second-hand products or products belonging to other
companies.
21.Instruction illustrations are for informational purposes only. The child
restraint system may contain small differences compared to the
photographs or images in the instruction manual. These variations do not
affect its certification under ECE Regulation R129.
22.Ensure that any strap or belt that holds the child is not bent or twisted and
keeps tightened. Act under the same criteria with the vehicle belts that
serve as a restraint for the chair.
23.Take advice from your vehicle manual to check compatibility with "i-Size"
child restraint systems.
24. When used for stature heights between 135 to 150cm this seat might not
fit in all vehicles.
1. OVERVIEW
A. Headrest height regulator.
B. Headrest.
C. Diagonal belt guides.
D. Abdominal belt guides.
E. ISOFIX arms.
F. ISOFIX unlock button.
G. Reclining system.
14