Description Of Display; Important - Cebora WIN TIG GC 250 T Manual De Instrucciones

4 DESCRIPTION OF DISPLAY

then presents the main screen (factory setting). The operator
may start welding immediately and may adjust the current by
turning knob B.
S
R
Q
P
As seen in the fi gure, the display is divided into sectors.
In each sector, settings operations may be conducted.
• To select sectors, press and release knob B so that
a sector is highlighted in red.
Turn knob B to select the desired sector, and then
briefl y press knob B to access the settings of the se-
lected sector.
• The most recent setting is highlighted in green,
and boxed in red; with the new selection, the red box
moves to the new choice
from now on, this procedure shall be

IMPORTANT

described indicating:
select and confi rm
on confi rmation, this symbol returns
to the screen previous to that in use
on selecting and confi rming this
symbol,
shall be set
to return to the main screen press
IMPORTANT
knob B (do not release immediately)
(> 0.7 sec.)
During
up, for 5 sec-
onds the dis-
play presents
all the informa-
tion regarding
the
machine soft-
ware versions.
The
N
O
the factory parameters
4.1 SECTOR I (WIZ)
This function enables rapid setting of the welding ma-
start-
chine.
4.1.1 SETTING THE WELDING PROCESS (PARA-
GRAPH 5)
welding
display
T
I
L
M
4.1.2 SETTING ARC IGNITION (PARAGRAPH 6 )
4.1.3 SET START-UP MODE (PARAGRAPH 7)
Select and
confi rm the
WIZ sector.
The next
choice is au-
tomatically
displayed
Select and
confi rm the
welding pro-
c e s s . T h e
next choice
is automat-
ically dis-
played.
Select and
confi rm type
of ignition.
The next
choice is au-
tomatically
displayed.
Select and
confi rm the
s t a r t - u p
mode.
The next
choice is au-
tomatically
displayed.
23