Program Overview, Shortcut Keys - Amann Girrbach Ceramill Therm 3 Manual Del Usuario

M A C H I N E S P E C I F I C A T I O N S
4.5

Program overview, shortcut keys

The Ceramill Therm 3 has 3 permanently set pro-
E N
gramming positions for sintering Ceramill ZI
frames of varying indication, as well as 247 freely
programmable programming positions for sinter-
ing dental oxide ceramics of other manufacturers
(observe manufacturer's information).
Program description
_ Program 1 [P1] - standard
▪ Standard program for Ceramill zirconium
oxides
▪ Universal sintering program for all common
indications.
T / °C
1450
200
_ Program 2 [P2] - fast
▪ Quick-sintering program for Ceramill zirco-
nium oxides - single units.
32
2 h
480 °C/h
(8 °C/min)
▪ Quick-sintering program only for single units -
Max. furnace filling load is one sintering bowl;
otherwise, sufficient through-sintering of the
objects cannot be achieved.
T / °C
1450
200
_ Program 3 [P3] - slow
▪ Sintering program with long-term cooling for
Ceramill zirconium oxides.
▪ Sintering program with dwell phase at 900 °C
and defined cooling. Particularly for large and
massive frames on which the connected
remaining blank is also sintered.
T / °C
10 t / h
1450
900
200
_ Program 4 [P4] - default
▪ Parameter freely assignable
1 h
720 °C/h
(12 °C/min)
2 h
–300 °C/h
(–5 °C/min)
0,5 h
480 °C/h
(8 °C/min)
10 t / h
10 t / h