Connecting The Power Cord - Epson SureColor T-Serie Guia De Instalacion

|

Connecting the Power Cord

64
On the front side of the printer, slide the basket's fabric all the way to the ends of the rounded pole as
14.
shown.
Connecting the Power Cord
Unlock the casters. Then, move the printer to the place of use. (The casters are meant for moving the
1.
printer for only a short distance.) Lock the casters after moving.
Connect the power cord to the AC inlet on the side of the printer.
2.
Plug the power cord into a properly grounded electrical outlet.
3.