Aligning The Print Head; Installing Software; Connecting To Your System - Epson SureColor T-Serie Guia De Instalacion

Aligning the Print Head

Follow the steps below to align the print head using the printer's control panel. Make sure the paper source
and media type settings are correct for the type of paper loaded.
Confirm that the printer is ready to print. Press l or r on the control panel to highlight
1.
and press . The
OK
Press d to select
Head Alignment
2.
Press d to select
Auto (Bi-D)
3.
Press again to begin the head alignment. The printer will automatically align the head as it prints
OK
4.
the head alignment pattern. When alignment is complete, the Maintenance menu will be displayed.
Note: See the User's Guide for instructions on performing a manual head alignment.

Installing Software

Insert the software CD that came with your printer into your computer and follow the on-screen
instructions.

Connecting to Your System

You can use USB and/or Ethernet
For USB connection, make sure your system has the appropriate port and that you have a standard,
shielded cable, 10 feet (3 m) long or less.
Note: Do not connect the printer until a software installation screen prompts you to do so.
menu will be displayed.
Maintenance
, then press
, then press
OK
® network connections.
Aligning the Print Head
.
OK
.
|
73
settings