Unpacking And Assembling The Printer - Epson SureColor T-Serie Guia De Instalacion

Unpacking and Assembling the Printer

Note: Unless otherwise indicated, the illustrations in this manual show the SureColor
apply to all three models.
Before beginning assembly, make sure you have sufficient space to set up and use the printer. The
following illustration shows the minimum space required for using the printer:
0.4 in. (10 mm)
When choosing a place for the printer, leave adequate room for easy access and ventilation. Avoid locations
subject to direct sunlight, excessive heat, humidity, or dust. Be sure the printer is placed on a flat, stable
location that can support the following weight for each printer:
•
SureColor T3070 - 112 lb (51 kg)
•
SureColor T5070 - 165 lb (75 kg)
•
SureColor T7070 - 180 lb (82 kg)
WARNING: Two people are required to unpack and install the SureColor T3070 printer; four people are
recommended to unpack and install the SureColor T5070 or SureColor T7070 printer.
You need an even larger floor space to assemble the printer and stand, so be sure to prepare a large, clear
area before unpacking them. Also make sure you save the box and packaging in case you need to ship the
printer later.
Unpacking and Assembling the Printer
5.9 in. (150 mm)
23.6 in. (600 mm)
® T7070, but the instructions
5.9 in. (150 mm)
|
55